How to update the firmware of your HDMI cameras

Please contact the sales representative for the upgrade files.

For XCAM series cameras, please refer to the following steps:

1. Unzip the .rar file, cope 3 files or 4 files into the SD card. Do not put any other files into the SD card.

2. Put the SD card into the SD card slot on the camera.

3. Connect the camera with the power adapter and turn on the power button. The camera will detect the upgrade files in SD card automatically and upgrade automatically. When the camera is upgrading, the blue LED will twinkle.

4. After a few minutes, the blue LED will stop twinkling and keep bright, which means the upgrading is finished.

5. Take the SD card with upgrade files out of the cameras to avoid the automatic upgrading when next restart.

6. Restart the camera.

For ALPHA series cameras, please refer to the following steps:

1. Cope the files into the SD card. Do not unzip .tar.gz file.

2. Put the SD card into the SD card slot on the camera.

3. Connect the camera with the power adapter and turn on the power button.

4. When the camera is started, find the “About” button and click it with the mouse:

ToupTek ToupTek

5. Select the target that to be update and wait until it is done.

ToupTek

6. For OEM version without “About” button, please click ToupTek to upgrade.

7. After the upgrade, please restart the camera.

Contact